Filter
Top Products
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01 27
Smart Recording: Allows you to upload the recorded image only, and skip the empty files. To
select this mode, you have to enable and configure the Motion Detection option first.
Port
Click the Port item of the Tools submenu to bring up the following page, which allows you to setup the
ports used to transmit the camera’s data.
- Enable UPnP Control Point: Setup the Web port to transmit the camera’s image data. The
default setting is port 80.
- Non UPnP: When you select this option, you can set up the following items manually.
• Web Port: Setup the Web port to transmit the camera’s image data. The default setting is port
80.
• AV Control Port: Setup the transmission of streaming data within the network. The default
setting is port 5000.
• AV Streaming Port: The default setting is port 5001.
• IP View Lite Port: The default setting is port 5100.
Mail
Click the Mail item of the Tools submenu to bring up the following page, which allows you to setup e-
mail function of the camera.