Filter
Top Products
IP Wireless Security Motorized Camera
A02-IPCAM2-W54_ME01 70
Question Answer
There is bad focus on
the IP Wireless Security
Motorized Camera,
what should be done?
• The focus might not be correctly adjusted for the line
of sight. You need to adjust the IP Wireless Security
Motorized Camera focus manually as described in
Adjust IP Wireless Security Motorized Camera Focus.
• There is no adaptor fitted with your C-type lens. If you
have previously changed the supplied CS-type lens,
you may have unintentionally installed a C-type lens
without fitting the adaptor first.
Question Answer
Noisy images occur
how can I solve the
problem?
• The video images might be noisy if the IP Wireless
Security Motorized Camera is used is a very low light
environment. To solve this issue you need more
lighting.
• There might be wireless transmission interference
make sure there are no other wireless devices on the
network that will affect the wireless transmission.
Question Answer
There is poor image
quality, how can I
improve the image?
• A probable cause might be the incorrect display
properties configuration for your desktop. You need
to open the Display Properties on your desktop and
configure your display to show at least 65’000 colors
for example at least 16-bit.
• Applying only 16 or 256 colors on your computer will
produce dithering artifacts in the image.
• The configuration on the IP Wireless Security
Motorized Camera
image display is incorrect.
Through the Web Configuration Image section you
need to adjust the image related parameter for
improve images such as brightness, contrast, hue and
light frequency. Please refer to the Web Configuration
section for detail information.