Filter
Top Products
21
AXIS 214 PTZ
Live View Config
Layout
These are the tools for deciding the layout of the Live View
page. The layout can be set in 3 ways:
• Use Axis look - the layout is unchanged.
• Use custom settings - modify the default page with your
ow
n colors, images etc. Click the Configure button and
see the following page.
• Own Home Page - Upload and use your own custom
page as the default
web page. Click the Configure but-
ton and see the following page.
Use custom settings
To change the background pictur
e, banner, colors,
etc., adjust the settings under Modify the Axis
look.
To use your own file for e.g. a banner, first upload
it (see
the next page) or select External and enter
the path to the file.
Upload Own Web Files
Your own web files, backgrou
nd pictures etc., must
first be uploaded to the AXIS 214 PTZ in order to
be available for selection in the Custom Settings
setup dialog. Once uploaded, the files are shown in
the drop-down list.
1. Enter the path to the file, e.g. a file located on
your workstation or click the Browse button.
2. Select the user level for the uploaded file. Setting the user access level means that you have
complete control over which pages can be viewed by which users.
3. When the path is shown correctly in the text field, click the Upload button.
All uploaded files are shown in the list in the lower section of
the page. To remove a file, check the box
provided next to it and then click the Remove button.
• To use your uploaded file, click the radio button and
select the file from the drop-down list by Own:
• To use an external file located somewhere other than
in the AXIS 214 PTZ, click the radio button and
enter the URL by External.
Note:
Unchecking the box for Show setup link removes the link from the camera’s web pages. The setup tools will then only be acces-
sible by entering the full setup address into the address/URL field of a browser, i.e. http://<ip address>/operator/basic.shtml