Filter
Top Products
36
AXIS 214 PTZ
Network - Bonjour
Your Axis network camera includes support for Bonjour. When enabled, the camera is automatically
detected by operating systems and clients that support this protocol.
Ports & Devices - I/O Ports
The pinout, interface support and the control and monitoring functions are described in the section
Connections, on page
38.
Maintenance
• Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not
behaving as expected.
• Restore - The
unit is restarted and most current settings are reset to factory default values. The settings
that will not be reset are as follows:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time.
• De
fault - The Factory default button should be used with caution. Pressing this button will reset all of
the AXIS 214 PTZ's settings to the factory default values (including the IP address).
Upgrade Server -
See Updating the Firmware, on page 39.
Backup - click the Backup button to take a backup of all of the parame
ters, and any user-defined scripts. If
necessary, it is then possible to return to the previous settings if the settings are changed and there is
unexpected behavior.
Note:
The root password will also be reset to the password saved in the backup file.
Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore
button. The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-unit
configuration or for firmware upgrades.
Support
• Support overview - This page provides information on troubleshooting and contact information, should
you require technical assistance.
• S
ystem Overview - This page provides an overview of the camera’s settings and the most recent log
entries with links to the corresponding pages.
• Logs & Reports - The
various logs and the Parameter List provide valuable information for trouble-
shooting and when contacting the Axis support serv
ice. Please be sure to always provide a Server
Report with your support query.
• Configuration - Select the required log level
to save.
• Log Level for Log Files - from the drop-down list, select the level of information to be added to the log file.
• Log Level
for Email - from the drop-down list, select the level of information to send as email and enter the destination email
address.