Filter
Top Products
37
AXIS 214 PTZ
Advanced
Scripting - this is a powerful and advanced function that enables the use of custom scripts.
Caution!
Improper use may cause unexpected behavior or even c
ause loss of contact with the unit. If a script
does cause problems, reset the unit to its factory default settings. A backup file may be of use to
return the unit to its latest configuration.
Axis strongly recommends that you do
not use this function unless you fully understand the
consequences. Axis support does not provide assistance for problems with customized scripts.
For more information, please visit the Developer pages
at www.axis.com/developer
Plain Config -
this function is for the advanced user with experience of Axis network camera configuration.
All parameters can be set and modified from this page. Help is available from the standard help pages.
Resetting to the factory default settings
To reset the AXIS 214 PTZ to the original default settings, go to the System Options > Maintenance web
page (described in Maintenance, on page 3
6) or use the Control button on the rear panel of the AXIS 214
PTZ, as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 214 PTZ
to the factory default settings using the Control
Button.
1. Switch off the AXIS 214 PTZ by disconnecting
the external power supply.
2. Using a suitably pointed object, press and hold the Control button while reconnecting the power
connector.
3. Keep the Control button pressed for approximately 15 seconds.
4. Release the Control button.
Note:
Resetting to the factory default settings using the Control Button will cause all parameters (including the IP address) to be reset.
Refer to Maintenance, on page 36 for other methods that do not reset the IP address.