Filter
Top Products
8
AXIS 214 PTZ
The Live View page
The following provides an overview of the controls found on the Live View page. If the AXIS 214 PTZ has
been customized (from Setup > Live View Config > Layout), the controls will be displayed accordingly:
Pan/Tilt/Zoom controls
The Live View page also displays the Pan/Tilt/Zoom controls.
These are enabled/disabled for specified users
by the administrator under System Options
> Security > Users > User List.
The Pan Tilt and Zoom bars control their respective functions in
two different ways.
Clicking anywhere on the bar's gradient allows for a 'smooth' adjustment of the camera's
position, whilst clicking on the arrows at the two ends of the bar causes a stepped,
incremental change.
Note:
Setting the iris and focus manually will disable Auto iris/Auto focus.
The Video Format drop-down list allows the video format on the Live View page to be
temporarily changed.
These buttons start/stop the Sequence Mode which automatically displays the view from preset
positions at set intervals. Sequence mode is configured in Setup > PTZ Configuration >
Sequence Mode.
The source list is used to select the preset positions already configured in the camera.
Th
ese are created in Setup > PTZ Configuration > Preset Positions.
The Manual trigger buttons trigger an action directly from the Liv
e View page. These buttons
are configured under S
etup > Live View Config > Layout. Click these buttons to manually
start and stop events.
Use the Snapshot button to capture a snapshot of the image currently being displayed in the
window. Right-click on the image to save it in JPEG format on your computer.
The 2 types of Output button
each control the output directly
from the Live View page. These
are configured under Setup >
Live View Config > Layout.
Pulse - click this button to activate the output for a
defined period of time, e.g. to switch on a light for 20
seconds.
Active/Inactive - click these buttons to manually start
and stop a connected device, e.g. switch a light on/off.