Filter
Top Products
7
AXIS 225FD - Product Features
Power connector block - for connection of a power supply. See Power connections, on
page 41
I/O terminal connector - The I/O terminal connector provides the physical interface to one
solid state relay output, two digital inputs, RS-485/422 and GND. For more information,
see
Unit Connectors, on page 38.
Network connector - The AXIS 225FD connects to the network via a standard network
cable, and automatically detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 225FD via
PoE (Power over Ethernet). The camera also negotiates the correct power level when using
PoE.
Serial Number - This number is used during installation.
Control Button - This button is used during the installation using the AXIS Internet
Dynamic DNS Service (see the Installation Guide) or to restore the factory default settings,
as described in
Advanced, on page 36.
LED Indicators
After completion of the startup and self test routines, the multi-colored Network, Status,
and Power LED indicators flash as follows:
Green Steady for connection to 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Red Flashes rapid red, together with the Status indicator, for hardware error.
Unlit No connection.
Green Shows steady green if the connected power supply can deliver the correct voltage for
the heater (12V DC min 20W or 24V AC min 25VA).
Red Shows steady red if the connected power supply cannot deliver the correct voltage.
Green Shows steady green for normal operation. Can be configured to flash green at intervals
whenever the camera is accessed. See the online help for more information.
Amber Shows steady amber during reset to factory default or when restoring settings.
Red Slow flash for failed upgrade (see Emergency Recovery Procedure, on page 44).
Rapid flash, together with the Network indicator, for hardware error.
Unlit When configured for “no flash” on camera access.
Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
Network
Heater
Status
Power