Filter
Top Products
21
AXIS 213 PTZ
Live View Config
Live View Layout
These are the tools for deciding the layout of the
Live View page. The layout can be set in 3 ways:
• Use Axis look - the layout is unchanged.
• Use custom settings - modify the default page
with your own colors, images etc. Click the Con
-
figure button and see the following page.
• Own Home Page - Upload and use a custom page
as the default web page. Click the Configure
button and see below.
Use custom settings
Adjust the settings under Modify the Axis look, to
change the background picture, banner, colors, etc.
To use your own file for e.g. a banner, check the
Own radio button and select your own uploaded file
from the drop-down list, or select External and
enter the path to the file. See below for instructions
on uploading your own files.
Own Home Page
To use a previously uploaded web page (see below)
as the default page, check the checkbox, select the
page from the drop-down list and click OK.
Upload Own Web Files
Your own web files, background pictures etc., must
first be uploaded to the AXIS 213 PTZ in order to be
available for selection in the Custom Settings setup
dialog. Once uploaded, the files are shown in the
drop-down list.
1. Enter the path to the file, or click the
Browse button.
2. Select the user level for the uploaded file.
Setting the user access level means that
you have complete control over which
pages can be viewed by which users.
3. When the path is shown correctly in the
text field, click the Upload button.
All uploaded files are shown in the list in the lower
section of the page. To remove a file, check the box
provided next to it and then click the Remove
button.
Note: Unchecking the box for Show setup link will remove the
setup link from the camera’s Home Page. The setup tools will
then only be accessible by entering the full setup address into the address/URL field of a browser, i.e. http://<ipaddress>/opera-
tor/basic.shtml