Filter
Top Products
25
AXIS 213 PTZ
Event Configuration
This section describes how to configure the AXIS 213 PTZ for alarm and event handling. The AXIS 213 PTZ
can be configured to perform certain actions when certain types of events occur.
Terminology
• Event Type - A set of parameters describing how and when the AXIS 213 PTZ should perform cer-
tain actions. An event type may result in a single event, or it may result in many, all depending on
how often the conditions governing its behavior are met.
• Triggered Event Type - An event that is activated by a specific internal or external trigger condi-
tion. For example by motion detection or by an external device such as a door switch or a sensor.
• Scheduled Event Type - An event that runs at a pre-programmed time.
• Action - What occurs when the event triggers, e.g. the upload of video images to an FTP server,
email notification, etc.
Event Servers
Event Servers are used, e.g. for receiving uploaded image files and/or notification messages. To set up Event
server connections in your AXIS 213 PTZ, go to Setup > Event Configuration > Event Servers and enter
the required information according to the selected server type.
For details on each setting, please refer to the online help files available from each web page.
Note: Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails.
When the setup is complete, the connection can be tested by clicking the Test button (the connection test
will take approximately 10 seconds).
Server type Purpose Required information
FTP server • Upload of saved images • IP address/hostname
• Descriptive name of your choice
• User name and password (to FTP server)
• Upload path e.g. images/
• Port number
• Use passive mode if there is a firewall between the camera and the FTP server
HTTP server • Notification messages
• Upload of saved images
• Descriptive name of your choice
•URL
• User name and password (to HTTP server)
• Proxy address/proxy port
• Proxy user name and password
TCP server
Notification messages
• IP address/hostname
• Descriptive name of your choice
• Port number