Filter
Top Products
30 en | Pelco On-Screen Menus AutoDome Modular Camera System
F01U064036 | 1.0 | 2007.01 VG4-200, VG4-300, VG4-500i Series User’s Manual Bosch Security Systems, Inc.
5.1.3 PTZ Setup (unlocked)
The Pelco PTZ Setup Menu provides access to the PTZ settings such as tours, scan speed,
presets, limit stops, recording, and AutoPivot.
PTZ Setup Menu Choices:
PTZ Setup
Exit...
* Edit Tour 1...
* Edit Tour 2...
* Tour 1 Period: 5 sec
* Tour 2 Period: 5 sec
* Scan Speed 30 deg/sec
Edit Presets...
*Limit Stops: OFF
*Recording: "A"
* Autopivot: ON
* = Factory Setting
Focus / Iris: Select
Menu Description Sub-menu / Description Default
Setting
Exit Exits the menu.
Edit Tour 1 Accesses the Add / Remove
Scenes On Standard Tour 1
Menu.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes scenes
from the Standard Tour.
Edit Tour 2 Accesses the Edit Custom Tour
Menu.
Exit: Exits the menu.
Scene (1 - 5): Adds or removes scenes
from the Custom Tour.
Tour 1 Period Changes the length of waiting
time between presets.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Tour 2 Period Changes the length of waiting
time between presets.
Sliding scale: – (3 sec. to 10 min.) + 5 sec.
Scan Speed Changes the Autopan and
AutoScan speeds.
Sliding scale: – (1°/sec to 60°/sec) + 30°/sec.
Edit Presets Modifies preset scenes. 1-99 scenes
Limit Stops Toggles the Limit Stops for
AutoScan.
ON or OFF OFF
Recordings Selects record Pattern 1 or 2, if
normal pattern command does
not respond.
“A” or “B”. “A”
AutoPivot Follows a subject while beneath
the camera, without inverting
the picture.
ON or OFF ON