Filter
Top Products
38 en | Advanced Features AutoDome Modular Camera System
F01U064036 | 1.0 | 2007.01 VG4-200, VG4-300, VG4-500i Series User’s Manual Bosch Security Systems, Inc.
To set up a scene with Motion Detection:
1. Choose an unused Preset position from 90 to 99. For this example use Preset scene 95.
2. Enter the keyboard command SET-95-ENTER.
3. Select YES at the Apply Motion Detection? prompt. (If NO is selected, the Preset scene
does not activate Motion Detection.)
4. Select YES at the Apply Region of Interest? prompt. (If NO is selected, the entire scene is
used for Motion Detection.)
5. Follow the on-screen menu instructions to construct the shape of the screen area you
want to detect motion within.
7.6 Pre-position Tour
The 300 and 500i Series AutoDomes feature two preset tours. Each scene is saved for play-
back later.
Tour 1 is a standard tour that only recalls the scenes in the exact sequence they were shot.
Scenes can be added or deleted on the tour, but the sequence can not be changed. To enter
the Add/Remove Scenes on Tour 1 enter the keyboard command SHOT-900-ENTER and follow
the on-screen instructions.
Tour 2 is a customizable tour that allows you to rearrange the sequence of scenes on the tour
by inserting and deleting scenes. To enter the Edit Tour 2 menu, enter the keyboard command
SET-900-ENTER and follow the on-screen instructions.
i
NOTICE! Motion Detection always takes precedence over AutoTrack object tracking.
i
NOTICE! Up to five (5) anchor points can be used to form the area which you want to detect
motion within.
NOTICE! Motion Detection is not activated until the Preset scene is recalled. The Motion
Detection icon "M" appears in the upper left-hand corner of the display.