Filter
Top Products
14 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera
F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
Menu Description Sub-menu / Description Default
Setting
Exit Exits the menu.
AutoPan Adjusts speed of camera during
AutoPan and AutoScan.
Sliding scale:
– (1º/sec. to 60º/sec.) +
30º/sec.
Tour 1 Period Changes dwell time between
presets during the tour.
Sliding scale:
– (3 sec. to 10 min.) +
5 sec.
Tour 2 Period Changes dwell time between
presets during the tour.
Sliding scale:
– (3 sec. to 10 min.) +
5 sec.
PTZ Fixed Speed Sets pan and tilt speed when
controlled by a fixed speed
controller.
Sliding scale:
– (1 to 15) +
4
Inactivity Selects the mode that an
AutoDome reverts to after the
period of inactivity set in the
inactivity period.
Scene 1: Returns to Preset 1.
Prev Aux: Returns to previous activity, such
as Aux commands 1, 2, 7, 8, 50, or 52.
OFF: Remains on the current scene
indefinitely.
OFF
Inactivity Period Sets the time period of inactivity
before the above action occurs.
Sliding scale:
– (3 sec. to 10 min.) +
2 min.
AutoPivot Automatically rotates the camera
180º when following a subject
traveling directly beneath the
camera.
OFF or ON ON
AutoDome
Orientation
Automatically rotates the video
180º.
INVERTED or NORMAL NORMAL
Freeze Frame On
Preposition
Holds a preposition video frame
while moving to another
preposition.
OFF or ON ON
Tilt Up Limit... Sets the upper tilt limit of the
camera.
Use joystick to move to a scene.
Azimuth Zero... Sets the zero degree pan position. Use the joystick to move to a scene that you
want to set as the zero degree pan position
and as the North compass heading.
Refer to Section 7.8 Azimuth, Elevation, and
Compass Directions, page 52.
Restore Defaults Restores the default setting for this
menu only.