Filter
Top Products
AutoDome 600 Series Analog PTZ Camera Table of Contents | en 3
Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06
Table of Contents
1 Getting Started 5
1.1 Powering On 5
1.2 Establishing AutoDome Control 5
1.2.1 Basic Keyboard Operation 6
1.2.2 Keyboard Commands 6
1.3 Setting the Camera Address 7
1.3.1 FastAddress 7
1.4 Setting Passwords 8
1.4.1 Special Passwords 8
2 On-Screen Display Menu Navigation 9
2.1 Setup Menu 9
2.2 Camera Setup Menu 10
2.3 Lens Setup 12
2.4 PTZ Setup Menu 13
2.5 Display Setup Menu 15
2.6 Communication Setup Menu 17
2.7 Alarm I/O Setup 18
2.8 Rule Setup Menu 20
2.9 Language Menu 22
2.10 Advanced Feature Setup Menu 22
2.11 Diagnostics Menu 23
2.11.1 Alarm Status Submenu 25
3 Common AutoDome User Commands (unlocked) 26
3.1 Setting AutoPan Mode 26
3.2 Setting Preset Shots 26
3.3 Specifying a Shot or a Sector Title 27
3.4 Configuring Preposition Tours 27
3.5 Programming the Inactivity Operation 28
3.6 Recording Tours 28
4 Alternative Control Protocols 29
4.1 Setting FastAddress with Alternative Protocols 29
4.1.1 Using an American Dynamics Controller 29
4.1.2 Using a Pelco Controller 32
4.2 Pelco Protocol Mode 33
4.2.1 Hardware Configuration 33
4.2.2 Pelco Keyboard Commands 34
4.2.3 Pelco Keyboard Commands 34
4.2.4 Special Preset Commands 35
5 Pelco On-Screen Menus 36
5.1 Setup Menu 36
5.1.1 Command Lock (locked) 37