Filter
Top Products
48 en | Advanced Features AutoDome 600 Series Analog PTZ Camera
F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
16. Select 5 sec from the Output Period drop-down list.
This option instructs the AutoDome to turn off the AutoTrack feature after five seconds
from when the tracked object is out of view.
7.2 AutoTrack Operation
The AutoDome features enhanced AutoTrack software with more versatility and smoother
object tracking. AutoTrack continuously follows an individual even if the person passes behind
a Privacy Mask. When used with Virtual Mask, it is able to ignore predefined areas of
background motion.
You can manually start AutoTrack or program the AutoDome to automatically turn on
AutoTrack.
– Manual
– Enter the keyboard command ON-78-ENTER.
– In Pelco Mode, open the Main menu, select the Advanced menu, and then select
AutoTrack On.
– Automatic
– During a pre-position tour.
–During AutoPan.
– AutoDome activates AutoTrack after a period of Inactivity (Return to Scene 1 or
Return to Previous Aux), if AutoTrack is programmed for these activities.
7.2.1 AutoTrack Settings and Recommendations
AutoTrack operates by recognizing an individual in motion and zooms-in to approximately 50%
of the field of view for an average target height of six feet. In addition to the camera height,
other factors may interfere with AutoTrack operation.
Setting the Camera Height
To ensure smooth tracking set the Camera Height accurately. Bosch recommends a minimum
camera height of 3.6 m (12 ft).
1. Press OFF-90-ENTER to turn off the command lock.?
2. Press ON-46-ENTER to access the Main Menu.?
3. Use the joystick to highlight the Advanced menu.?
4. Press Focus/Iris to open the menu.?
5. Highlight the Camera Height option and press the Focus/Iris button.?
6. Enter a value between 3.6 m (12 ft) and 30.7 m (100 ft).
7. Press Focus/Iris again to accept the camera height value.
8. Exit the Advanced menu; then exit the Main menu.
Ensuring Smooth AutoTrack Operation
Factors such as the viewing angle and unwanted motion (from trees, for example) may
interfere with AutoTrack operation. Use the following recommendations to ensure smooth
AutoTrack operation:
NOTICE!
For proper operation AutoTrack requires that the camera height be set in the software. Open
the Bosch Main menu, select the Advanced menu and select Camera Height to enter the
height.