Filter
Top Products
24 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera
F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
Menu Description Sub-menu / Description
Exit Saves and exits the menu.
Alarm Status Enters the Alarm Status menu and displays the
real time status of alarm inputs and outputs.
Alarm Inputs 1 to 7, Alarm Outputs 1
to 3 and Alarm Relay
BIST Enters the Perform Built-in Self Tests menu. If
confirmed, the BIST tests start and the results
are displayed.
YES to start test. NO to exit the
menu.
Typical results displayed as follows:
BIST
Exit...
Data Flash: PASS
Bilinx: PASS
FPGA: PASS
Digital I/O 1: PASS
Digital I/O2: PASS
VCA: PASS
Homing: PASS
Internal Temp. Displays the current dome temperature.
High Temp Events Displays the number of times the high
temperature threshold is exceeded.
Highest Temp Displays the highest temperature reached.
Low Temp Events Displays the number of times the low
temperature threshold is exceeded.
Lowest Temp Displays the lowest temperature reached.
Security Access Displays the number of times the locked-
command menu is unlocked.
CTFID Access Displays the number of times the Configuration
Tool is accessed.
Homing Events Displays the number of times the AutoDome was
rebooted.
Homing Failed Displays the number of times the AutoDome
failed to home properly.
Loss Home Events: Displays the number of times the AutoDome lost
the home position.
Home Position Good Displays if the current AutoDome home position
is good. Displays YES if good.
Restart Events Displays the number of restart events.
Low Volt Events Displays the number of times the AutoDome
dropped below the acceptable voltage limit.
Power Up Events Displays the number of power up events.
Video Loss Events Displays the number of time that video was lost.