Filter
Top Products
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 23
Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06
Advanced Feature Setup Menu Choices:
2.11 Diagnostics Menu
The Diagnostics menu provides access to a list of diagnostic tools and events.
Diagnostic Events
Menu Description Sub-menu / Description Default
Setting
Exit Saves and exits the menu.
Stabilization Turns on video stabilization. OFF
AutoTrack Sensitivity Sets the sensitivity level of
AutoTrack.
Sliding scale: -(Auto, 1 to 20)+
Where 1 is more sensitive and 20 is less
sensitive. Auto varies the sensitivity level
based on various lighting conditions.
Auto
AutoTrack Timeout Toggles the AutoTrack Timeout
feature.
When On, AutoTrack “gives up” after the
Timeout Period if tracking in a confined
area (for example a tree, a flag, etc).
OFF
AutoTrack Timeout
Period
Enters the AutoTrack Timeout
Period set menu
Sliding scale 30 sec, 1 to 30 min. 5 min
Camera Height Defines the height of the
camera for AutoTrack.
A range from 2.4 m (8 ft) to 30.7 m
(100 ft)
3.6 m (12 ft)
Virtual Masking Enters the Virtual Mask menu.
See Section 7.3 Virtual Masking,
page 50.
Allows up to 24 virtual masks using five
anchor points.
Restore Defaults Restores the default settings
for this menu.
Diagnostics
Exit...
Alarm Status...
BIST...
Internal Temp: Deg F / Deg C
High Temp Events: Deg F / Deg C
Highest Temp Deg F / Deg C
Low Temp Events: Deg F / Deg C
Lowest Temp: Deg F / Deg C
Security Access: 0
CTFID Access: 0
Homing Events: 0
Homing Failed: 0
Loss Home Events 0
Home Position Good YES
Restart Events:
Low Volt Events: 0
Power Up Events: 0
Video Loss Events: 0
Total Time On 0hr 0min
Focus / Iris: Save and Exit