Filter
Top Products
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 21
Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06
Rule # Choices:
Menu Description Sub-menu / Description Default
Setting
Exit Saves and exits the menu.
Enabled Turns the rule on or off after its
inputs and outputs have been
defined.
YES to enable or NO to disable NO
Input Toggles through a list of valid
inputs set in the Alarm I/O Setup
> Inputs Setup Menu that define
the rule's inputs. A rule can have
up to four (4) inputs.
Alarm Inputs 1 – 7 and any additional inputs which
were set in the Inputs Setup Menu, including Aux
On/Off (1-99), Shot, and NONE.
NONE
Output Toggles through a list of valid
outputs set in the Alarm I/O Setup
> Outputs Setup Menu that
defines a rule's outputs.
Alarm Outputs 1 – 3 and any additional outputs set
in the Outputs Setup Menu including: Alarm Relay,
Aux On/Off (1-99), Shot, OSD, Transmit, and
NONE.
Some outputs, such as Alarm Outputs 1-3, Alarm
Relay, and Aux On/Off can be set to be active for a
specific duration of time as follows:
Seconds: 1-5, 10, 15, or 30
Minutes: 1-5 or 10
Latched: The alarm stays active until acknowledged.
Follows: The alarm follows the alarm rule.
NONE
NOTICE!
You can include up to four (4) Input and Output events in a single rule. Each input and output,
however, must be true for the alarm's rule to be valid and enabled.