Filter
Top Products
Photos
68
3 Press to protect the still
image.
appears on the bottom bar and
the image cannot be erased. Press
again to cancel the image
protection.
4 Repeat steps 2-3 to protect
additional images or press
twice to close the menu.
IMPORTANT
Initializing the memory ( 31) will
permanently erase all recordings,
including protected still images.
Copying Photos
You can copy still images from the built-
in memory to the memory card and vice
versa.
POINTS TO CHECK
Select in advance the memory from which
you want to copy the still images ( 61).
Copying a Single Image
FUNC.
( 25)
[ COPY] [YES]
Copying Images from the Index Screen
Options
FUNC.
( 25)
1 Move the zoom lever toward W.
The still image index screen appears.
2 Select the memory from which you
want to copy the still images.
Refer to To select which still images
to play back ( 61).
3 If you want to copy only one
image, select ( , ) the still
image you want to copy.
4 Copy the still image(s).
[
COPY]
Desired option [YES]* [OK]**
* When copying all the still images, press
twice to interrupt the operation while it is in
progress.
**Only when copying all still images.
IMPORTANT
Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the mode
dial.
( 24)
FUNC.
FUNC.
FUNC.
[ALL IMAGES]
Copies all the still images.
[ONE IMAGE]
Copies only the selected still image.
FUNC.
FUNC.
COPY