Filter
Top Products
111
Print Settings/Transfer Settings
6
3 Select images for transferring.
Single Images
z Select an image with the or button
and mark or remove marks from images
using the FUNC./SET button. A checkmark
displays on selected images.
z When you press the button, the Jump
Bar is displayed to help with searching
(p. 90). Press the FUNC./SET button after
the MENU button to select and deselect, and to remove the Jump Bar.
z After changing to Index playback (nine-image display) by pressing the
zoom lever to the side, you can select images in the same way (if you
press the zoom lever to the side again, the camera jumps nine
images at a time. Before selecting or deselecting, press the zoom lever to
to remove the Jump Bar).
All images on a memory card
z Select [Mark All] as in Step 2, and press the
FUNC./SET button. To select all images,
select [OK] with the or button, and
press the FUNC./SET button.
z To cancel all print selections, select [Reset].
4 Press the MENU button.
The selection mode will turn off and the Transfer Order menu will reappear.
Images are transferred in order from oldest to newest by the shooting
date.
A maximum of 998 images can be selected per memory card.
EC176CUG_E.book Page 111 Tuesday, June 28, 2005 12:40 PM