Filter
Top Products
132
3 Move in the direction of the
arrow and insert it into the
viewfinder until it clicks into
place.
z To remove the conversion lens
adapter, follow the above steps in
reverse order.
4 Turn the lens in the direction of the arrow to attach it.
z When attached to the camera, do not carry the camera by the
conversion lens adapter, wideconverter or the tele-converter.
The camera could detach, fall and break.
z To protect the conversion lens, hold the conversion lens adapter with
one hand and screw the conversion lens onto the adapter with the
other hand.
z You should not shoot images in (Stitch Assist) mode when using
these attachments. Although it is possible to select this mode on the
camera, the PhotoStitch software will not be able to stitch the images
together at the computer.
z Completely remove all dust and dirt from conversion lenses with a
lens blower brush before use. The camera may focus on any dirt that
remains.
z Be careful when handling the lenses so as not to get fingerprints on
them.
EC176CUG_E.book Page 132 Tuesday, June 28, 2005 12:40 PM