Filter
Top Products
1-25
Setting HTTP/FTP Upload and E-mail Notification (Upload)
1
1
Detailed Settings
HTTP Upload
(1) [Notification]
Select [Notification Only with HTTP] or [Image attached Notification with HTTP] as the content
of notification.
(2) [URI]
Enter the URI to upload to (using up to 255 characters).
(3) [User Name], [Password]
Enter the user name and password required for authentication.
(4) [Proxy Server]
Enter the host name or IP address of the proxy server (using up to 63 characters).
z Reduce the uploading frequency:
- Reduce the value in [Pre-event Buffer (number of image frames)] or [Post-event Buffer
(number of image frames)] ( P. 1-34).
-If [Motion Detection Event] is enabled, disable [ON Event Operation], [OFF Event
Operation] or [Continuous Motion Operation] ( P. 1-35).
-If [External Device Input Event] is enabled, disable [ON Event Operation] or [OFF Event
Operation] ( P. 1-37).
-If [Interval Timer Event] is enabled, increase the value in [Interval of the Timer] ( P. 1-
38).
z Reduce the e-mail notification frequency:
-If [Motion Detection Event] is enabled, disable [ON Event Operation], [OFF Event
Operation] or [Continuous Motion Operation] ( P. 1-35).
-If [External Device Input Event] is enabled, disable [ON Event Operation] or [OFF Event
Operation] ( P. 1-37).
-If [Interval Timer Event] is enabled, increase the value in [Interval of the Timer] ( P. 1-
38).