Filter
Top Products
1-38
Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
(7) [Audio Playback at ON Event]
Select the audio playback operation to be performed upon an ON event. If [Enable] is
selected, the sound specified in [Sound Clip] is played when an ON event is input from an
external device.
(8) [Audio Playback at OFF Event]
Select the audio playback operation to be performed upon an OFF event. If [Enable] is
selected, the sound specified in [Sound Clip] is played when the event input from an external
device turns OFF.
(9) [Sound Clip]
Select the audio to be played. For registration of sound clips, see "Sound Clip Upload" ( P.
1-39).
(10)
[Volume]
Set the sound clip volume as an integer between 1 and 100. The greater the value, the larger
the volume.
Interval Timer
(1) [Interval Timer Event]
Select the time event setting from [Enable] or [Disable]. If you select [Enable], (2) Interval of
the Timer, (3)Upload and (4) E-mail Notification appear.
(2) [Interval of the Timer]
Select a desired timer interval from the pull-down menu in a range of [1 sec.] to [24 hours].
(3) [Upload]
Select the upload operation. If [Enable] is selected, upload is performed at the specified
intervals. To use this function, the [Upload] menu must also be set.
(4) [E-mail Notification]
Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail
notification is performed at the specified intervals. To use this function, the [E-mail Notification]
sub-menu must also be set from the [Upload] menu.