Filter
Top Products
2-31
Preset Setting Tool
VBAdmin Tools
As a rough guide, the pan/tilt mechanism can withstand 300,000 back-and-forth movements
in full-angle operation *. The total touring time is determined by a combination of moving
speed, moving range and pause duration. Set an appropriate time by referring to the table
below.
Total touring time until preset tours corresponding to 300,000 back-and-forth movements are
completed in the pan direction (rough guide)
Example: Speed (PT): 1, Pause: 30 seconds, Moving range (angle) in pan direction: If ± 50
degrees, 300,000 back-and-forth movements will be completed in 28333 hours.
* Based on our measurement standards
Tip
z Preset tour is not performed while the camera is being controlled with VB-C60 Viewer, etc.
z Preset tour is disabled when options such as RM-64/RM-25/RM-9, bundled RM-Lite, and
Motion Detection Setting Tool are connected to the camera.
Setting Speed (PT) to 1
Pause
(sec.)
Pause
(sec.)
0
10
20
30
11616
17000
22666
28333
11475
14166
17000
19833
11427
13222
15111
17000
± 50 ± 100 ± 150
Pan Direction Movement Range (degree) Pan Direction Movement Range (degree)
(Unit: hour) (Unit: hour)
0
10
20
30
5950
11333
17000
22666
5808
8500
11333
14166
5761
7555
9444
11333
± 50 ± 100 ± 150
Setting Speed (PT) to 2