Filter
Top Products
113
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
When the images have been sent
successfully to the CANON iMAGE
GATEWAY server, [
] is displayed on
the screen.
Images are automatically saved to the
computer when you turn it on.
Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is off.
•When sending images, you should use a fully charged battery pack
or an AC adapter kit (sold separately, =
126).
• Even if images were imported to the computer through a different method, any
images not sent to the computer via CANON iMAGE GATEWAY will be sent to
the computer.
• Sending is faster when the destination is a computer on the same network
as the camera, because images are sent via the access point instead of
CANON iMAGE GATEWAY. Note that images stored on the computer are
sent to CANON iMAGE GATEWAY, so the computer must be connected to the
Internet.
3 Choose the type of images
to send (only when sending
movies with images).
Press the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
(=
23).
Press the <o><p> buttons to choose
[Image Sync], and then press the
<q><r> buttons to choose [Stills/
Movies].
• To choose a Web service as the destination, follow the steps in “Registering
Other Web Services” (=
99) to update the camera settings.
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server. Stored
images are regularly erased, so make sure to turn on the computer and
save the images.
Follow the steps in “Connecting to WPS-
Compatible Access Points” (=
103) to
choose [
].
Once the connection is established, the
images are sent.