Filter
Top Products
40
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Customizing Camera Operation
Customize shooting functions on the MENU [4] tab as follows.
For instructions on menu functions, see “Using Menus” (=
23).
Still Images
Deactivating the AF-Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
Press the <n> button, choose
[AF-assist Beam] on the [4] tab, and
then choose [Off] (=
23).
To restore the original setting, repeat this
process but choose [On].
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce red-
eye when the ash is used in low-light shots.
1 Access the [Flash Settings]
screen.
Press the <n> button, choose [Flash
Settings] on the [4] tab, and then press
the <m> button (=
23).
2 Congurethesetting.
Choose [Red-Eye Lamp], and then
choose [Off] (=
24).
To restore the original setting, repeat this
process but choose [On].
Still Images
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
1 Access the [Review image after
shooting] screen.
Press the <n> button, choose
[Review image after shooting] on the
[4] tab, and then press the <m> button
(=
23).
2 Congurethesetting.
Choose [Display Time], and then choose
the desired option.
To restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec.,
4 sec.,
8 sec.
Displays images for the specied time. Even while the shot is displayed, you
can take another shot by pressing the shutter button halfway again.
Hold Displays images until you press the shutter button halfway.
Off No image display after shots.