Filter
Top Products
32
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
•Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change depending
on the zoom range.
- White range: optical zoom range where the image will not appear
grainy.
- Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
settings (=
37), the maximum zoom factor can be achieved by
following step 1.
• Focal length when optical and digital zoom are combined is as follows (35mm
lm equivalent).
24 – 2880 mm (24 – 720 mm with optical zoom alone)
• To deactivate digital zoom, press the <n> button, choose [Digital Zoom]
on the [4] tab, and then choose [Off].
Still Images Movies
Reacquiring Subjects Lost after Zooming
(Framing Assist – Seek)
If you lose track of a subject while zooming in, you can nd it more easily by
temporarily zooming out.
1 Look for the lost subject.
Press and hold the < > button.
The camera zooms out and displays a
white frame around the area previously
shown (before you pressed the <
>
button).
2 Reacquire the subject.
Aim the camera so that the subject enters
the white frame, and then release the
<
> button.
The previous magnication is now
restored, so that the area outlined in
white lls the screen again.
•Some shooting information is not displayed while the camera is
zoomed out.
•During movie shooting, the white frame is not displayed if you press
the <
> button. Also note that camera operating sounds such as
zooming will be recorded.