Filter
Top Products
39
Preparing the Camcorder
Adjusting the Grip Belt
Adjust the grip belt so that you can reach the START/STOP button
on the grip unit with your index finger but still have a comfortable but
secure grip.
IMPORTANT
• Be careful not to drop the camcorder when adjusting the grip belt.
Attaching the Handle Unit
1 Insert the attachment base at the bottom of the handle unit to the
camcorder’s accessory shoe.
2 Tighten the handle unit’s lock screw while gently pressing it down.
NOTES
• You can use the accessory shoe or the socket for 0.64 cm (1/4 in.)
screws on the handle unit to attach a variety of commercially available
accessories.
Attaching a Shoulder Strap
Pass the ends through the strap mount and adjust the length of
the strap.
IMPORTANT
• Be careful not to drop the camcorder when attaching or adjusting the
shoulder strap.
Removing and Attaching the Terminal Covers
You can remove the plastic covers of the following terminals and SD card slot to access them more readily.
Removing the Terminal Covers
Open the terminal cover and gently pull it straight out.
• EXT 1 and EXT 2
•SYNC OUT
• GENLOCK and TIME CODE
•HD/SD SDI
• CH1 and CH2
(XLR terminals on the monitor unit)
• × (headphones)
•DC IN
•SD card slot
• REMOTE and HDMI OUT
•MIC
•WFT
ባ
ቢ
COPY