Filter
Top Products
4
99
Customization
Assignable Buttons
The camcorder conveniently features 15* buttons to which you can assign various functions. By assigning often-
used functions, you can quickly access them with a single press of a button. Some assignable buttons are
located on the monitor unit or grip unit, so their availability depends on the camcorder configuration used.
* In mode, only assignable buttons 1 to 9 are available.
Changing the Assigned Function
1 Open the [Assign Button] submenu.
[w Other Functions] > [Assign Button]
2 Select the button to change and then press SET.
• A list of available functions appears.
• The quick reference shows the default settings for each assignable
button. By default, buttons 10 to 15 have no assignable function set.
3 Select the desired function and then press SET.
• If you selected [User Setting (NONE)], the menu will change from
orange to blue to indicate you are selecting a menu setting to register.
Continue the procedure to register a menu setting. Otherwise, you do
not need to perform the rest of the procedure.
4 Navigate the menus to find the menu setting you want to register
and then press SET.
• The selected menu setting will be registered to the customizable slot and to the assignable button.
• The name of the selected menu setting will be listed instead of [User Setting (NONE)] and the customizable
slot will be marked by a .
NOTES
• You can check the two [Assign Button] status screens (A 157) to see what functions are set for the
assignable buttons.
• You can reset only the functions assigned to the assignable buttons, without affecting other camera settings,
with the [w Other Functions] >[Reset] > [Assignable Buttons] function. All the assignable buttons will return
to their default function.
Operating modes:
On the monitor unit:
On the grip unit:
[w Other Functions]
[Assign Button]
[1 Magnification]
[2 Peaking]
[3 Zebra]
[4 WFM (LCD)]
[5 Headphone +]
[6 Headphone -]
[7 Magnification]
[8 WFM (LCD)]
[9 Edge Monitor]
[10-15 (NONE)]
COPY