Canon DC 40 Camcorder User Manual


 
107
External Connections
Connecting to a Computer
E
Connecting the Camcorder and Running the Software
1. Power the camcorder using the compact power adapter.
2. Start the computer and turn on the camcorder and set it to play movies
().
3. Connect the camcorder to the computer using the USB cable.
4. Run the program from the desktop shortcut or from Windows Start
menu.
Check the orientation of the USB cable and make sure you connect it properly.
Do not connect the camcorder to a computer with the USB cable during the
following operations:
DVD copies and DVD backup discs created with MyDVD for Canon cannot be
unfinalized using the camcorder.
One-Touch Dubbing (Windows XP only)
If your computer is equipped with a DVD drive with writing capabilities, with the touch of
one button you can make a copy of your DVD and burn it to an empty media in your
computer’s drive without the need to run the program.
1. Connect the camcorder to the computer but do not run MyDVD for
Canon.
Steps 1 through 3 above.
2. Insert a finalized disc in the camcorder and load a brand new
DVD-R/RW in your computer’s DVD drive.
To make a copy of a DVD-RW recorded in VR mode, load a blank DVD-RW in your
computer’s DVD drive. To make a copy of a disc recorded in VIDEO mode, you can
load a blank DVD-R or DVD-RW.
When all the connections are completed and the software recognizes a blank media
ready in the DVD drive, the (print/share) button will light on and the message
“PRESS TO COPY DISC” will appear on the camcorder’s display.
If you did not complete the online user registration after installing the software
( 106), the (print/share) button will not light up even though all the
preparations are completed correctly.
If the (print/share) button does not light up even if you completed the user
registration, verify that the icon appears on your computer’s desktop toolbar. If it
does not, disconnect the USB cable, restart the computer and connect the
camcorder to the computer again.
- Deleting all scenes
- Protecting the disc
- Setting the disc title
- Initializing the disc
- Finalizing or Unfinalizing the disc