Filter
Top Products
69
Advanced Features
Changing the FUNC. Settings
E
Creating Panoramic Images
You can shoot a series of overlapping images and merge them on a computer into one
large panoramic image using the supplied software (PhotoStitch). For further details
about the procedure refer to the software’s instruction manual on the supplied software
CD-ROM.
1. Set the camcorder to record still images on the card ( / )
and set the mode dial to a position other than .
If you are recording still images on the disc ( ), change the media for the still
images ( 36).
2. Press the FUNC. button.
3. First, select ( ) the current drive mode symbol from the left side
column and then select ( ) the [ STITCH AST] option from the
bottom bar and press ( ).
The Stitch Assist screen appears.
4. Select ( ) the direction in which you will take the sequence of still
images.
5. Select the recording program and zoom on the subject.
• The manual focus and manual exposure adjustment cannot be used with the Stitch
Assist mode.
• Once the sequence has started, you cannot change the recording program or zoom.
6. Press the PHOTO button to record the first image.
The number of images recorded so far and the direction and number of the next image
appear below the image.
(60)
SINGLE
PHOTO button
FUNC. button
Multi Selector