Filter
Top Products
127
Trouble?
E
Direct Print Related Messages
About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes
or an error message appears on the printer’s operation panel, refer to the printer’s
instruction manual.
DISC ACCESS FAILURE
CHECK THE DISC
There was an error when reading the disc or attempting to write
onto it. Try cleaning the disc or replace it.
130
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
132
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
–
DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover. 31
NO DISC No disc is loaded. Insert a disc. 31
You inserted a disc recorded in a different Television System (PAL
or SECAM).
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
132
LOADING THE DISC The disc is being read. Wait before you start recording. –
AVOID MOVING THE
CAMCORDER
Try not to move the camcorder while the image is being recorded. –
UNABLE TO RECOVER
DATA
Could not recover a corrupted file. 90
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
132
DISC FULL The disc is full (“ END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
31
86
NO CARD Memory card not is inserted into the camcorder. 30
NO IMAGES No images are recorded on the memory card. –
CARD ERROR A memory card error occurred. The camcorder cannot record or
display the image.
The error may be temporary. If the message disappears after 4
seconds and “ ” flashes red, turn the camcorder off, remove the
card and reinsert the card. If “ ” changes to green, you can
continue recording/playback.
–
CARD FULL Memory card is full. Erase some images to free some space or
replace the memory card.
92
NAMING ERROR The folder and file numbers have reached their maximum value.
Set the [FILE NOS.] option to [RESET] and initialize the disc or
memory card, erase all the images on the memory card or replace
the disc.
–
UNIDENTIFIABLE
IMAGE
The image file is corrupted or it was saved using a compression
method other than that compatible with this camcorder (JPEG).
–
TRANSFER ORDER
ERROR
You attempted to set more than 998 transfer orders. 113
TOO MANY STILL
IMAGES DISCONNECT
USB CABLE
Disconnect the USB cable and decrease the number of still
images on the memory card or disc to less than 1800. Images
cannot be erased from a DVD-R or DVD-RW disc recorded in
VIDEO mode.
If a dialog appeared on the computer screen, close it and then
reconnect the USB cable.
–
Message Explanation