Filter
Top Products
96
Protecting Still Images on the Memory
Card
You can protect still images recorded on the memory card from accidental erasure while
displaying a single image or from the index screen.
Initializing the memory card ( 97) will permanently erase all recorded still
images, even the protected ones.
Protecting a Single Image
1. Set the camcorder to view still images recorded on the memory card
(/).
2. Press the FUNC. button.
The option is also available while recording still images ( ) but only if you
press the FUNC. button while reviewing the still image ( 81) within the time
selected for the [REVIEW] setting (or immediately after recording it, if set to [OFF]).
3. Select ( ) the [ PROTECT] symbol and press ( ).
4. Select ( ) [ON] and press ( ) to protect the still image.
To cancel the protection, select [OFF].
5. Press the FUNC. button to close the menu.
“ ” appears, and now the image cannot be erased.
Protecting Still Images from the Index Screen
1. Set the camcorder to view still images recorded on the memory card
(/).
2. Move the zoom lever toward
W
.
The stills index screen appears with up to six still images.
3. Press the MENU button and use the multi selector ( , ) to select
the [STILL IMG OPER.] menu and then select the [ PROTECT]
option.
4. Bring ( , ) the cursor to the image you want to protect and
press ( ). Repeat this step to select other images as desired.
• “ ” appears on the image.
• To cancel the protection, press ( ) again.
5. Press the MENU button to close the menu and return to the index
screen.
(60)
PROTECT
MENU
(79)
STILL IMG OPER. PROTECT