Canon DC 40 Camcorder User Manual


 
19
Introduction
E
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This is
helpful to avoid scenes that are too short.
Disc operation
Record, Record pause,
Playback, Playback pause,
Fast playback,
Fast reverse playback,
Slow playback,
Slow reverse playback,
Frame advance,
Frame reverse
Remaining recording time
When there is no more disc space
available, “ END” will be displayed
and the recording will stop.
Number of still images available on
the card
flashing in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images can be
recorded
When viewing the still images, the
display will always be in green.
Depending on the recording conditions,
the number of still images available
displayed may not decrease even after
a recording has been made, or may
decrease by 2 still images at once.
Card/Disc Access Display
” is displayed next to the number of
images available while the camcorder is
writing on the memory card or disc.
Remaining battery charge
When “ ” starts flashing in red
replace the battery pack with a fully
charged one.
When you attach an empty battery
pack, the power may turn off without
displaying “ ”.
Depending on the conditions under
which the camcorder and the battery
pack are used, the actual battery
charge may not be indicated accurately.