Canon MV500i Camcorder User Manual


 
111
E
Additional
Information
Screen Displays
To display the date and time, press the
DATA CODE button. See also p. 71.
Press the wireless controller’s TV
SCREEN button or turn TV SCREEN
on through the menu to see the other
displays on the TV screen. (The
displays appear white on-screen.) They
will not be added to any recordings you
make with the camcorder.
TV
SCREEN
DATA
CODE
To turn the display off, open the menu and select DISP. SET UP.
Then select DISPLAYS, set it to OFF <PLAYBK> and close the
menu.
If you turn the displays off, the LCD screen will be completely blank
(including connected TV screen), but the camcorder will continue to show
warning/caution displays when necessary, and the data code appears in the
display if it is set to ON.
When operating the camcorder, the displays appear for 2 seconds. However,
the displays do not disappear when displaying an index screen.
indicates a flashing display.
TV SCREEN•••ON
DISP. SET UP
DISPLAYS••••ON
DISP.SET UP
REC
PAUSE
Record pause mode
( 18)
Recording ( 19)
The backup battery is
not properly installed,
or needs replacing
( 100).
To turn TV SCREEN off, open the menu and select DISP. SET UP.
Then select TV SCREEN, set it to OFF and close the menu.
For instructions on how to hook the camcorder up to your TV, see p. 32.
You can turn off the displays to give you a clear screen for playback.
( 39)
( 39)
CAMERA
PLAY
(VCR)
Turning off the LCD screen displays
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 111