Filter
Top Products
83
E
Editing
Connecting the camcorder to your VCR or 8 mm video camcorder allows
conversion of recorded analog video and audio signals to digital signals in an
instant. The digital signals can be output to the other equipment with a DV
terminal. The camcorder’s DV terminal works exclusively as an output terminal.
• There may be cases where analog-digital converter cannot be done properly,
depending on the signals output from the connected equipment.
For example: Signals that include the copyright protective signal, or anomalous
signals such as ones that include ghost signals, etc.
• You cannot use your headphones during digital conversion. Even if the
AV/headphone terminal is set to “PHONES” through the menu, it will
automatically be set to “AV”, and “PHONES” will disappear from the display.
• You are recommended to use power from a household mains outlet with the
power adapter.
• Do not operate with a cassette inserted to the camcorder.
• Turn off the power of all equipment before performing connections.
• Refer also to the instruction manuals of the other equipment connected.
Digitally Outputting Analog Video and Audio
Signals
—
Analog-Digital Converter (MV500i only)
AV
MIC
DV
S
OUTPUT
VIDEO
S(S1)-VIDEO
AUDIO
L
R
CV-150F DV Cable (optional)
STV-250N
Stereo Video Cable
: Signal flow
Side with
arrow
S-150 S-video Cable (optional)
Side with arrow
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 83