Canon MV500i Camcorder User Manual


 
32
E
Mastering
the Basics
Connections for Playback on a TV Screen
You can connect the camcorder to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camcorder ( 11).
Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
AV
MIC
Through the menu, the camcorder’s AV/headphone terminal can be switched to
function as either the AV terminal or the headphone terminal.
Open the menu and select VCR SET UP. Then select AV/PHONES and set it
to AV or PHONES and close the menu.
When the terminal is switched to PHONES, PHONES appears in the display.
Using the headphones
Make sure you switch the AV/headphones terminal to PHONES before using
headphones. If the AV/headphones terminal is not switched to PHONES before
you use the headphones, noise will come out from the headphones.
,
PLAY
(VCR)
CAMERA
AV/PHONES•••AV
VCR SET UP
( 39)
Switching the AV/headphone terminal
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 32