Filter
Top Products
49
E
Using the Full
Range of Features
Taking Still Pictures
You can record still pictures like a photograph. The camcorder records the picture
and sound to tape for several seconds. The exposure is automatically adjusted.
Also, starting your shooting with a still photo makes it easy to find the beginning
again later with the Photo Search function ( 74).
You can take a still picture at any time during regular video recording, or you can
put the camcorder into record pause mode first, then take a still picture.
Press the PHOTO button fully down and the still picture will be taken
immediately.
• The camcorder takes the image immediately, and then records the “photo” to the
tape for approximately 6 seconds. During this time the camcorder also records
the sound, and the display shows the still picture.
• A counter display appears, and counts up as the camcorder records the picture.
• The camcorder returns to record pause mode.
1. Press the
PHOTO
button halfway down and hold it:
• “PHOTO” flashes at the bottom right of display.
• Exposure is locked.
• During autofocus
F
flashes white in the display as the camcorder adjusts the
focus and it is displayed continuously as a green mark when the camcorder
is ready to take the still picture.
• If the subject is unsuitable for autofocus ( 106), the camcorder may not be
able to focus, and
F
may continue to flash white in the display. Continue to
hold the PHOTO button halfway down, then adjust the focus manually with
the selector dial.
• If you are using manual focus ( 68), the
F
mark starts as a continous
green mark. Focus with the selector dial.
During record pause mode
During record mode
PHOTO
PHOTO
PHOTO
CAMERA
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 49