Canon MV500i Camcorder User Manual


 
62
E
Using the Full
Range of Features
To turn it on, open the menu and select VCR SET UP. Then select
WIND SCREEN, set it to ON and close the menu.
WS O is shown in the display when you turn the wind screen on.
Notes:
The wind screen can be used for audio dubbing with the built-in microphone in
PLAY (VCR) mode as well as recording (when AUDIO DUB. is set to MIC. IN
in VCR SET UP submenu).
The wind screen does not operate when an external microphone is connected to
the MIC terminal.
Wind screen
The camcorder has an automatic wind screen to prevent wind noise from
interfering with the sound track. Make sure its off when you want the
microphone to be as sensitive as possible. Use the wind screen when recording in
windy places such as the beach or near buildings.
WIND SCREEN••OFF
VCR SET UP
( 39)
Notes:
When using an external microphone, use a microphone cable not longer than 3
meters to avoid electromagnetic inerference.
Be careful when using long microphones as they may extend into the frame.
,
PLAY
(VCR)
CAMERA
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 62