Filter
Top Products
104I P_._.g
To the BJ Printer • Turn the Bubble Jet printer's power on
after you have connected the power
interface Cable
cord to the Bubble Jet printer and
inserted the other end in a power
outlet.
Attach the interface cable to the Bubble
Jet printer.
Open the camera's terminal cover and
insert the cable's connector into the
camera's DIGITALterminal. Orient the
cable so that the word Canon on the
connector faces the camera's front
panel.
Set the mode switch to the F_I position
and turn on the camera's power.
[] will display when the printer is
correctly connected.
1
This shows when
a BJ printer is
connected.
printed through the operation panelwhile the camera isconnected.
• Thefollowing cannot be conducted while the printer isconnected.
- Playing movies
- Setting the language with the SETand the MENU button
combination.
• When the printer is disconnected, the [] or [] symbol will
disappear from the LCD monitor and the camera will revert
to the standard replay mode.
• Use the following procedures to datach the cable from the
camera and printer.
I. Detach the cable from the printer.
2. Shut off the camera's power.
3. Detach the cable from the camera.
• Ensure that you grip the connector's sides when you detach
the cable from the camera's DIGITAL terminal.