Filter
Top Products
111
This is a connection mode available when using an access point
compatible with Wi-Fi Protected Setup (WPS). In the PIN code
connection mode (PIN mode), an 8-digit identification number specified
on the camera is set at the access point to establish a connection.
Even if there are multiple access points active in the surrounding area,
a relatively reliable connection can be established using a shared
identification number.
It may take about one minute to establish a connection.
If stealth functions of the access point are enabled, connection
may be disabled. Deactivate stealth functions.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi] to
[Enable], then select [Wi-Fi
function].
2
Select [w].
Select [w] (Upload to Web service)
and press <0>.
3
Select a Web service.
Select a Web service to connect to
and press <0>.
The contents and ordering of the list
of items displayed will vary depending
on settings.
The Web service to connect to can be
changed later (p.126).
When [ ] (Email) is selected, a list
of registered addresses is displayed
(p.125).
Easy Connection via WPS (PIN Mode)
COPY