Filter
Top Products
62
This is a connection mode available when using an access point
compatible with Wi-Fi Protected Setup (WPS). In PIN code connection
mode (PIN mode), an 8-digit identification number specified on the
camera is set at the access point to establish a connection.
Even if there are multiple access points active in the surrounding area,
a relatively reliable connection can be established using this shared
identification number.
It may take about one minute to establish a connection.
If stealth functions of the access point are enabled, connection
may be disabled. Deactivate stealth functions.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi] to
[Enable], then select [Wi-Fi
function].
2
Select an item.
Select either [q], [D], [l], or [ ],
then press <0>.
3
Select [Infrastructure mode].
Displayed when [q] (Connect to
smartphone) or [l] (Print from Wi-Fi
printer) is selected.
Press the <V> key to select
[Infrastructure mode], then press
<0>.
Select [OK] and press <0> to go to
the next screen.
Easy Connection via WPS (PIN Mode)
COPY