Filter
Top Products
Easy Connection via WPS (PBC Mode)
58
3
Select [Infrastructure mode].
Displayed when [q] (Connect to
smartphone) or [l] (Print from Wi-Fi
printer) is selected.
Press the <V> key to select
[Infrastructure mode], then press
<0>.
Select [OK] and press <0> to go to
the next screen.
4
Select [WPS (PBC mode)].
Press the <V> key to select [WPS
(PBC mode)], then press <0>.
Select [OK] and press <0> to go to
the next screen.
5
Connect to the access point.
Press the access point’s WPS button.
For details about where the button is
located and how long to press it, refer
to the access point’s instruction
manual.
Select [OK] and press <0> to
establish a connection with the
access point.
X When a connection with the access
point is established, the [IP address
set.] screen is displayed.
6
Set the IP address.
Press the <V> key to select the
content of IP address setting, then
press <0>.
Select [OK] and press <0> to go to
the next screen.
COPY