Filter
Top Products
15
Turn the Command Dial to a
shooting mode.
•
The camera will then turn on and the
LCD panel will display one of the
following battery level icons:
: Battery level OK.
: The battery level is low. Keep
spare batteries handy.
: The batteries will soon be
completely exhausted.
: Replace the batteries.
(
→page 5)
• The battery life shown in the table is based on the Canon’s testing
conditions with new batteries.
Battery Life (With 24-ex.rolls)
Temperature 0% Flash Use 50% Flash Use 100% Flash Use
At 20˚C 67 rolls 30 rolls 22 rolls
At –10˚C 44 rolls 20 rolls 15 rolls
When not using the camera, set the Command Dial to < >.
Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
• If nothing is displayed on the LCD panel, the batteries may have been
installed incorrectly.Take out the batteries and install correctly.(→page 14)
• Pressing the shutter button halfway for a prolonged period or operating only
the autofocus without taking a picture will still consume battery power. It will
reduce the number of rolls that can be taken with the batteries.
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 15