Filter
Top Products
46
Auto Exposure Bracketing (AEB)
Correct
exposure
Decreased
exposure
Increased
exposure
3
Take the picture.
The respective AEB amount is
displayed on the LCD panel and in the
viewfinder for each bracketed shot.
•
The picture will be taken in the current
film advance mode. (→page 35)
•
After the three AEB shots are taken,
the AEB will not be canceled
automatically.To cancel AEB, set the
AEB amount back to “”.
AEB cannot be used with flash or bulb exposures.
• During AEB shooting, the
<>
arrow mark and
<>
AEB level icon next
to the
<>
icon will blink.
• In the < > film advance mode, the camera will stop shooting automatically
after three shots.
• If the self-timer or remote control is used, the three AEB shots will be taken
in continuous succession automatically.
• AEB can be combined with exposure compensation.
With AEB, the camera automatically changes the exposure within the
set range (up to
+
/
–
2 stops in 1/2-stop increments) for three successive
frames.
1
Move the < > arrow to the < >
icon.
•
Look at the LCD panel and press the
< > button. ( )
2
Set the desired AEB amount.
•
Turn the < > dial.
The AEB amount and AEB range
<>
are displayed on the LCD panel.
•
The sample illustration left
shows an AEB amount of 1 stop with
respect to the correct exposure level.
AEB amount
AEB range
NNN E SEC3 (31-51) 02.5.11 11:16 AM Page 46