Filter
Top Products
37
The Difference Between < > and < >
• The < > and < > modes set the same shutter speed and
aperture settings automatically for picture-taking.
• The following features can be used with < >, but not with < >:
About Program Shift
• In the Program AE mode, you can freely change the shutter speed
and aperture combination (program) set by the camera while
retaining the same exposure.This is called program shift.
• To shift the program, press the shutter button halfway and turn the
< > dial until the desired shutter speed or aperture is displayed.
• After the picture is taken with the shifted program, the shifted
program is canceled automatically and the original program is
restored.
• Program shift cannot be set when the built-in flash is used.
· Manual AF point selection
· Film advance mode selection
· Program shift
· AE lock with the < > button
· Exposure compensation
· AEB
· Depth-of-field preview
· Multiple exposures
· Built-in flash ON/OFF
4
Take the picture.
•
Compose the shot and press the
shutter button fully.
NNN E SEC3 (31-51) 02.5.11 11:16 AM Page 37