Filter
Top Products
36
:Program AE
Like the < > (Full Auto) mode, this
is a general-purpose mode to make
picture-taking easy. It sets the shutter
speed and aperture automatically to
suit the subject’s brightness.
∗ “P” stands for Program.
∗ “AE” stands for auto exposure.
1
Turn the Command Dial to < >.
2
Press the shutter button halfway
to focus.
3
Check the display.
The shutter speed and aperture are
set automatically and displayed in the
viewfinder and on the LCD panel.
•
If the shutter speed and aperture do
not blink, a correct exposure will be
obtained.
•
If the shutter speed and aperture
blink, see “Exposure Warning List” on
page 53.
NNN E SEC3 (31-51) 02.5.11 11:16 AM Page 36