Filter
Top Products
47
Bulb Exposures
• Remote Switch RS-60E3 (optional) is recommended for bulb exposures.
• Bulb exposures can also be taken with wireless remote control (optional).
Press the transmit button to start the exposure, and press it again to stop
the exposure. (DATE Model only)
• With a new set of batteries, the maximum bulb exposure time (at 20˚C) will
be about 4 hours.
A bulb exposure starts when you press the shutter button fully and ends
when you release the shutter button. Bulb exposures are useful when long
exposures are required for night scenes, fireworks, astronomical photogra-
phy, etc.
1
Turn the Command Dial to < >.
3
Press and hold down the < >
button and turn the < > dial to
set the desired aperture.
4
Start the bulb exposure.
•
Press and hold down the shutter
button.
During the bulb exposure, “”
blinks on the LCD panel.
•
The bulb exposure continues as long
as you hold down the shutter button.
2
Set the shutter speed to “ ”.
•
Turn the < > dial until “”is
displayed on the LCD panel.
•
“”follows “”.
NNN E SEC3 (31-51) 02.5.11 11:16 AM Page 47