Filter
Top Products
50
Using the Built-in Flash
If the film is not DX-coded or if you want to set a different film speed,
you can set the film speed manually after loading the film into the cam-
era.The settable film speed range is ISO 6 to 6400.
1
Move the < > arrow to the < >
icon.
•
Look at the LCD panel and press the
< > button to move the arrow.
()
The current film speed is displayed.
2
Set the desired film speed.
•
Turn the < > dial to set the film
speed.
The manually-set film speed will be canceled if the film is taken out and DX-
coded film is loaded.
Flash Distance Range (With EF 28-90mm f/4-5.6)
ISO
28mm 90mm
Negative Film Slide Film Negative Film Slide Film
100 m / ft
1 - 4.2 / 3.3 - 13.1 1 - 3.0 / 3.3 - 9.8 1 - 3.0 / 3.3 - 9.8 1 - 2.1 / 3.3 - 6.9
400 m / ft
1 - 8.5 / 3.3 - 27.9
1.2 - 6.0 / 3.9 - 29.5
1 - 6.0 / 3.3 - 19.7 1 - 4.3 / 3.3 - 14.1
• When using the built-in flash, stay at least 1 meter/3.3 feet away from the
subject. Otherwise, part of the photo will look dark.
• When using the built-in flash, detach any hood attached to the lens. A lens
hood will partially obstruct the flash coverage.
• When a super telephoto lens or a fast, large-aperture lens is attached, the
built-in flash coverage might be obstructed.
• To retract the built-in flash, push it down.
• The built-in flash’s flash coverage is 28mm lens angle.
•
If more light is required, use an external, EOS-dedicated Speedlite (optional).
:Setting the ISO Film Speed
NNN E SEC3 (31-51) 02.5.11 11:17 AM Page 50