Filter
Top Products
51
Silencing the Beeper
Connect the (optional) Remote Switch
RS-60E3’s plug to the camera’s
remote control terminal. Press the
release button to take the picture.
The beeper can be silenced in all of the shooting modes.
1
Move the < > arrow to the < >
icon.
•
Look at the LCD panel and press the
< > button. ( )
2
Set the setting to “ ”.
•
Turn the < > dial.
•
To enable the beeper to sound, set to
“”.
Illuminating the LCD panel.
•
Press the
<>
button.
()
•
To turn off the illumination, press the
< > button again or press the
shutter button halfway.
•
While the LCD panel is illuminated,
pressing any buttons (except the
shutter button) or turning any dials
will extend the illumination time.
LCD Panel Illumination
Using the Remote Switch
NNN E SEC3 (31-51) 02.5.11 11:17 AM Page 51