Filter
Top Products
42
:Manual Exposure
1
Turn the Command Dial to < >.
3
Press the shutter button halfway
to focus the subject.
The exposure level will be displayed in
the viewfinder and on the LCD panel.
•
The exposure level indicator < >
indicates how close the exposure
level is to the correct exposure.
2
Set the shutter speed and aperture.
•
To set the shutter speed, turn the
< > dial.
•
To set the aperture, hold down the
< > button and turn the < >
dial.
4
Set the desired exposure.
•
Look at the exposure level indicator
and set the shutter speed and
aperture as desired.
•
If the exposure level indicator < >
blinks at < > or < >, it
indicates that the exposure is
respectively overexposed or
underexposed by 2 stops or more.
: This is the standard level for a correct
exposure.
Correct exposure
Over exposure
Under exposure
: To achieve the correct exposure, set a
faster shutter speed or a smaller aperture.
: To achieve the correct exposure, set a
slower shutter speed or a larger aperture.
In this mode, you set both the shutter speed and the aperture for total
exposure control.The exposure level of the shutter speed and aperture
you set is indicated on the exposure level scale.You can thereby check
how suitable the exposure will be. In the < > mode, the centerweighted
average metering will be set automatically. ∗ “M” stands for Manual.
NNN E SEC3 (31-51) 02.5.11 11:16 AM Page 42